Lathe tool holders

Total found: 68

Only new

Only in stock

Only special price

Bolt On toolholder for indexable drills, clamping capacity ø40mm, bolt grid 35x76 mm

KMS-T13064Running out of stock

CA$243.74

excl. taxes

Bolt On face turning toolholder, clamping capacity 25x25mm, bolt grid 35x76 mm

KMS-T00068Running out of stock

CA$268.43

excl. taxes

BMT55 (90°) OD turning toolholder, clamping capacity 25 x 25 mm

BMT55-OD25-80Running out of stock

CA$271.70

excl. taxes

VDI30 Boring bar holder, Ø 32mm, H 85mm, DMG MORI

115-53028Running out of stock

CA$291.24

excl. taxes

BMT60 toolholder for indexable drills, clamping capacity ø40mm, center height 90mm

128-21516Running out of stock

CA$324.39

excl. taxes

BMT65 (90°) OD turning toolholder, clamping capacity 1" x 1" (25.4 x 25.4 mm)

BMT65WJ25.4H75Running out of stock

CA$375.89

excl. taxes

BMT65 twin OD turning toolholder, clamping capacity 25x25mm

128-41802Running out of stock

CA$401.87

excl. taxes

ER16 collet chuck adapter with hex nut, straight shank Ø3/4 x 4 inches

AD34i-ER16A-4iRunning out of stock

CA$33.83

excl. taxes

VDI30 steel protection plug, form Z2

Z2-30x16SRunning out of stock

CA$50.04

excl. taxes

VDI30 Round soft blank, form A2, Ø68x100 mm, Ø2.68×3.94 inches

A2-30x100Running out of stock

CA$63.43

excl. taxes

VDI30 boring bar holder, form E2, internal Ø32 mm

E2-30x32Running out of stock

CA$77.53

excl. taxes

VDI40 Round soft blank, form A2, Ø83x120 mm, Ø3.27×4.72 inches

A2-40x120Running out of stock

CA$85.75

excl. taxes

VDI30 Round soft blank, form A2, Ø68x240 mm, Ø2.68×9.45 inches

A2-30x240Running out of stock

CA$92.09

excl. taxes

VDI30 collet chuck holder, ER16, form E4

E4-30xER16Running out of stock

CA$95.85

excl. taxes

VDI30 collet chuck holder, ER25, form E4

E4-30xER25Running out of stock

CA$95.85

excl. taxes

VDI30 collet chuck holder, ER32, form E4

E4-30xER32Running out of stock

CA$95.85

excl. taxes

VDI30 OD turning toolholder 20x20mm, form B2 left, short

B2-30x20x40Running out of stock

CA$97.03

excl. taxes

VDI40 OD turning toolholder 25x25mm, form B1, right, short

B1-40x25x44Running out of stock

CA$124.04

excl. taxes

VDI40 Round soft blank, form A2, Ø83x320 mm, Ø3.27×12.60 inches

A2-40x320Running out of stock

CA$131.79

excl. taxes

VDI40 face and grooving turning toolholder 1x1", form C1 right

C1-40x1ix85Running out of stock

CA$144.48

excl. taxes

VDI40 face and grooving turning toolholder 1x1", form C2 left

C2-40x1ix85Running out of stock

CA$144.48

excl. taxes

VDI30 Rectangular soft blank, form A1, 85x130x76 mm, 3.35×5.12×2.99 inches

A1-30x85Running out of stock

CA$161.40

excl. taxes

VDI30 quick change tapping chuck with length compensation, length 55mm, TC312 collets

VDI30-TC312-55Running out of stock

CA$259.36

excl. taxes

VDI30 quick change tapping chuck with length compensation, length 77mm, TC820 collets

VDI30-TC820-77Running out of stock

CA$281.91

excl. taxes

The cutting process in a lathe is carried out by rotating the workpiece in the spindle and feeding the lathe carriage, in which the cutting tool is securely fixed. In most modern lathes, all types of lathe tools like cutters, drills, and taps are mounted through tool holders for lathe, which in turn are mounted in the turret. You can read about the types of turrets in our article on this lathe turret types.

Why Tool Holders for Metal Lathe Have Undeniable Advantages:

Global standardization and versatility. The same tool holder lathe can be used on any other CNC machine with the same type of turret.
Time-saving setup capability. The ability to set up and preset outside the machine = saving auxiliary time = saving your money.
Cost-effective protection. A tool holder for lathe is relatively inexpensive (compared to the cost of the lathe turret), and in the event of tool and holder collisions with the workpiece, it is often only these elements that get damaged, rather than the expensive components of the CNC machine.
Maximum flexibility. The ability to configure the lathe turret for each specific job. Engineers are not limited by previous setup or pre-engineered positions in the lathe turret, but only by the number of positions/posts in the revolver of the CNC machine. For example, for part X today, you need a long boring bar mounted in position No. 1, and tomorrow, due to the geometric constraints of part Y, you can place a parting tool or any other turning cutting tool in the same position.

Types of Static Tool Holders for Metal Lathe

CNC tool holder for metal lathe is classified by the type of machining and/or the type of tool to be mounted in the fixture and size. The main types of lathe tools holders include:

Radial Turning Tool Holder (OD)

The most common type of tool holder lathe for mounting tools with a square shank for machining the outer diameter of the workpiece. The tool in such holders is positioned perpendicular to the axis of rotation of the part (radially). The holder design always includes a slot for the tool and a clamping plate for fixation.

Axial Turning Tool Holder (OD/FACE)

Structurally identical to radial tool holders for lathe, except that the tool is positioned parallel to the axis of the spindle rotation (axially). Mainly used for holding tools for face grooving. They can also be used for external and internal turning operations.

Boring Bar Tool Holders (ID)

Used for mounting round shank boring bars for inside diameter (ID) machining. The bar is positioned against the face of the workpiece. Usually they have three clamping screws because the tool often needs to be clamped along a longer length. Typically, two nozzles for coolant supply are located externally on these holders.

Why Tool Holders for Metal Lathe Have Undeniable Advantages:

Global standardization and versatility. The same tool holder lathe can be used on any other CNC machine with the same type of turret.

Time-saving setup capability. The ability to set up and preset outside the machine = saving auxiliary time = saving your money.

Cost-effective protection. A tool holder for lathe is relatively inexpensive (compared to the cost of the lathe turret), and in the event of tool and holder collisions with the workpiece, it is often only these elements that get damaged, rather than the expensive components of the CNC machine.

Maximum flexibility. The ability to configure the lathe turret for each specific job. Engineers are not limited by previous setup or pre-engineered positions in the lathe turret, but only by the number of positions/posts in the revolver of the CNC machine. For example, for part X today, you need a long boring bar mounted in position No. 1, and tomorrow, due to the geometric constraints of part Y, you can place a parting tool or any other turning cutting tool in the same position.

Types of Static Tool Holders for Metal Lathe

CNC tool holder for metal lathe is classified by the type of machining and/or the type of tool to be mounted in the fixture and size. The main types of lathe tools holders include:

Radial Turning Tool Holder (OD)

Axial Turning Tool Holder (OD/FACE)

Boring Bar Tool Holders (ID)

Lathe tool holders

Why Tool Holders for Metal Lathe Have Undeniable Advantages:

Types of Static Tool Holders for Metal Lathe

Radial Turning Tool Holder (OD)

Axial Turning Tool Holder (OD/FACE)

Boring Bar Tool Holders (ID)

Why Tool Holders for Metal Lathe Have Undeniable Advantages:

Types of Static Tool Holders for Metal Lathe

Radial Turning Tool Holder (OD)

Axial Turning Tool Holder (OD/FACE)

Boring Bar Tool Holders (ID)

Indexable Drill Bodies Tool Holders

Cut-off Blade Tool Holders

Morse Taper Tool Holders

Tool Holders with Collet Chuck

Tool Holders with Drill Chuck

Tool Holders with Quick Change Tapping Chuck

Special Fixtures and Accessories

How to Choose the Right Tool Holders for Your CNC Metal Lathe?

Universal Approach for Tool Holder Selection

Selecting Tool Holders for Specific Technology/Part