DNMG432 Carbide (CVD) Negative Turning Insert, for P Materials, HR4, grade EC265H
DNMG150408, 55° Rhombic Negative Turning Insert, Carbide (CVD), RE 0.8mm (0.03") for medium turning of P Materials in good (uninterrupted) conditions
DNMG150408, 55° Rhombic Negative Turning Insert, Carbide (CVD), RE 0.8mm (0.03") for medium turning of P Materials in good (uninterrupted) conditions
| Turning Load | Medium |
|---|---|
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC265H |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | DNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC265H
P15 (P10-P25) CVD-coated grade, suitable for finish to rough turning on steel and cast steel. Recommended for continuous and light interrupted cutting, offering a high metal removal rate.
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.
| Turning Load | Medium |
|---|---|
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC265H |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | DNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC265H
P15 (P10-P25) CVD-coated grade, suitable for finish to rough turning on steel and cast steel. Recommended for continuous and light interrupted cutting, offering a high metal removal rate.
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.