CNMG 120408E-LE4 EC265H, ANSI: CNMG 432, 80° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for medium turning of P Materials in good (uninterrupted) conditions
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC265H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Negative |
| Chip Breaker | LE4 |
| ANSI code | CNMG 432 |
| ISO code | CNMG 120408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Turning Inserts |
Grade: EC265H
P15 (P10-P25) CVD-coated grade, suitable for finish to rough turning on steel and cast steel. Recommended for continuous and light interrupted cutting, offering a high metal removal rate.
Chip Breaker: LE4
First choice for heat-resistant alloy medium turning. Designed for medium turning of heat-resistant alloys and titanium alloys. Features a large rake angle and small land width for easy cutting, making it also suitable for soft steel turning.
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC265H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Negative |
| Chip Breaker | LE4 |
| ANSI code | CNMG 432 |
| ISO code | CNMG 120408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Turning Inserts |
Grade: EC265H
P15 (P10-P25) CVD-coated grade, suitable for finish to rough turning on steel and cast steel. Recommended for continuous and light interrupted cutting, offering a high metal removal rate.
Chip Breaker: LE4
First choice for heat-resistant alloy medium turning. Designed for medium turning of heat-resistant alloys and titanium alloys. Features a large rake angle and small land width for easy cutting, making it also suitable for soft steel turning.