5 June 2025 10:06
Email: info@CNCmarket.ca
Phone: (825) 454 66 97
Turning Inserts
Total discount 2%
In Stock
DNMG 150408E-HW4 EC565H, ANSI: DNMG 432, 55° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for semi-finish turning of P Materials in general (medium Interrupted) conditions
80127382
EASYCUT - Part # 80127382
In Stock
10,16 CA$
10,37 CA$
The price is calculated on 05.06.2025
Price incl. VAT, delivery to your address
100 pcs.
Calgary (2360 Portland Str SE)
Main settings
| Turning Load | Semi-finish |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Negative |
| Chip Breaker | HW4 |
| ANSI code | CNMG 432 |
| ISO code | DNMG 150408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Item type | Turning Inserts |
Grade: EC565H
P25 (P15-P35) Recommended for steel, cast steel, and ferritic/martensitic stainless steel, from finishing to roughing. This grade is suitable for both continuous and interrupted turning, making it the first choice for general turning applications.
Chip Breaker: HW4
First choice for steel semi-finish turning. Combines a positive rake angle with a small land to ensure edge strength and sharpness while reducing cutting force. The wavy side edge design provides excellent chip-breaking performance in shoulder copying and profile turning with varying cutting depths.
| Turning Load | Semi-finish |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Negative |
| Chip Breaker | HW4 |
| ANSI code | CNMG 432 |
| ISO code | DNMG 150408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Item type | Turning Inserts |
Grade: EC565H
P25 (P15-P35) Recommended for steel, cast steel, and ferritic/martensitic stainless steel, from finishing to roughing. This grade is suitable for both continuous and interrupted turning, making it the first choice for general turning applications.
Chip Breaker: HW4
First choice for steel semi-finish turning. Combines a positive rake angle with a small land to ensure edge strength and sharpness while reducing cutting force. The wavy side edge design provides excellent chip-breaking performance in shoulder copying and profile turning with varying cutting depths.
Reviews