DNMG432 Carbide (CVD) Negative Turning Insert, for P Materials, HW2, grade EC565H
DNMG150408, 55° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for finish turning of P Materials in general (medium Interrupted) conditions
DNMG150408, 55° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for finish turning of P Materials in general (medium Interrupted) conditions
| Turning Load | Finish |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HW2 |
| ANSI code | DNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HW2
Negative Inserts: First choice for stainless steel finish turning. Equipped with a light cutting chip breaker for low cutting force, making it ideal for machining slender shafts, thin walls, and unstably clamped parts, with excellent cutting performance.
Positive Inserts: First choice for steel finish turning. Features a positive rake angle that reduces cutting force and built-up edge, ensuring improved surface finish and extended tool life. Also suitable for stainless steel turning.
| Turning Load | Finish |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HW2 |
| ANSI code | DNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HW2
Negative Inserts: First choice for stainless steel finish turning. Equipped with a light cutting chip breaker for low cutting force, making it ideal for machining slender shafts, thin walls, and unstably clamped parts, with excellent cutting performance.
Positive Inserts: First choice for steel finish turning. Features a positive rake angle that reduces cutting force and built-up edge, ensuring improved surface finish and extended tool life. Also suitable for stainless steel turning.