WNMG432 Carbide (CVD) Negative Turning Insert, for P Materials, HR4, grade EC565H
WNMG080408E, 80° Triangle Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for medium turning of P Materials in general (medium Interrupted) conditions
WNMG080408E, 80° Triangle Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for medium turning of P Materials in general (medium Interrupted) conditions
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | W Style - Trigon |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Positive |
| Chip Breaker | HR4 |
| ANSI code | WNMG 432 |
| ISO code | WNMG 080408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | W Style - Trigon |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Corner Radius, inch | 0.03 |
| Side Clearance | Positive |
| Chip Breaker | HR4 |
| ANSI code | WNMG 432 |
| ISO code | WNMG 080408 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.