DCGT 11T304FP-SY EH511X, ANSI: DCGT3251, 55° Rhombic Positive Turning Insert, RE 0.4mm (0.03"), Periphery ground for finish turning of P Materials in good (uninterrupted) conditions
| Turning Load | Finish |
|---|---|
| Workpiece Material | [P] Steel, [S] High-Temp Alloys, [M] Stainless Steel |
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Periphery Ground |
| Grade | EH511X |
| Corner Radius, inch | 0.015 |
| Side Clearance | Positive |
| Chip Breaker | SY |
| ANSI code | DCGT 3251 |
| ISO code | DCGT 11T304 |
| Corner Radius, mm | 0.4 |
| Brand | EASYCUT |
| Item type | Turning Inserts |
Grade: EH511X
S25 (S15-S35) PVD-coated grade, designed for low cutting speeds or light interrupted cutting. Suitable for semi-roughing or short-term continuous machining due to its excellent notch wear resistance and anti-heat shock capability.
M25 (M15-M35) PVD-coated grade, suitable for finish turning at low to medium speeds and interrupted turning. Offers excellent thermal stability, delivering outstanding performance in applications requiring a sharp edge, edge toughness, or superior surface quality.
P25 (P15-P35) PVD-coated grade, recommended for finish turning on low-carbon steel at low cutting speeds or low feed rates.
Chip Breaker: SY
| Turning Load | Finish |
|---|---|
| Workpiece Material | [P] Steel, [S] High-Temp Alloys, [M] Stainless Steel |
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Periphery Ground |
| Grade | EH511X |
| Corner Radius, inch | 0.015 |
| Side Clearance | Positive |
| Chip Breaker | SY |
| ANSI code | DCGT 3251 |
| ISO code | DCGT 11T304 |
| Corner Radius, mm | 0.4 |
| Brand | EASYCUT |
| Item type | Turning Inserts |
Grade: EH511X
S25 (S15-S35) PVD-coated grade, designed for low cutting speeds or light interrupted cutting. Suitable for semi-roughing or short-term continuous machining due to its excellent notch wear resistance and anti-heat shock capability.
M25 (M15-M35) PVD-coated grade, suitable for finish turning at low to medium speeds and interrupted turning. Offers excellent thermal stability, delivering outstanding performance in applications requiring a sharp edge, edge toughness, or superior surface quality.
P25 (P15-P35) PVD-coated grade, recommended for finish turning on low-carbon steel at low cutting speeds or low feed rates.