DCMT3252 Carbide (PVD) Positive Turning Insert, for S Materials, HE3, grade EH211L
DCMT11T308, 55° Rhombic Positive Turning Insert, RE 0.8mm (0.03"), Carbide (PVD) for semi-finish turning of S Materials in good (uninterrupted) conditions
DCMT11T308, 55° Rhombic Positive Turning Insert, RE 0.8mm (0.03"), Carbide (PVD) for semi-finish turning of S Materials in good (uninterrupted) conditions
| Turning Load | Semi-finish |
|---|---|
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (PVD) |
| Grade | EH211L |
| Side Clearance | Positive |
| Chip Breaker | HE3 |
| ANSI code | DCMT 3252 |
| Workpiece Material | [S] High-Temp Alloys |
| ISO code | DCMT 11T308 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EH211L
S15 (S05-S25) First choice for heat-resistant alloys. PVD-coated grade with high hardness and excellent resistance to plastic deformation, ensuring high performance and superior wear resistance.
M15 (M05-M25) PVD-coated grade, recommended for finish turning, offering high hardness and excellent resistance to plastic deformation.
Chip Breaker: HE3
First choice for semi-finish turning. The cutting edge design ensures smooth cutting, effectively prevents built-up edge formation, and supports a wide range of chip evacuation.
| Turning Load | Semi-finish |
|---|---|
| Cutting Conditions | Good-Uninterrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (PVD) |
| Grade | EH211L |
| Side Clearance | Positive |
| Chip Breaker | HE3 |
| ANSI code | DCMT 3252 |
| Workpiece Material | [S] High-Temp Alloys |
| ISO code | DCMT 11T308 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EH211L
S15 (S05-S25) First choice for heat-resistant alloys. PVD-coated grade with high hardness and excellent resistance to plastic deformation, ensuring high performance and superior wear resistance.
M15 (M05-M25) PVD-coated grade, recommended for finish turning, offering high hardness and excellent resistance to plastic deformation.
Chip Breaker: HE3
First choice for semi-finish turning. The cutting edge design ensures smooth cutting, effectively prevents built-up edge formation, and supports a wide range of chip evacuation.