31 August 2025 05:08
Email: info@CNCmarket.ca
Phone: (825) 454 66 97
Carbide Inserts
Total discount 30%
In Stock
CNMG432 Carbide (CVD) Negative Turning Insert, for P Materials, HR6, grade EC565H
80127363
EASYCUT - Part # 80127363
In Stock
CNMG120408, 80° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for rough turning of P Materials in general (medium Interrupted) conditions
CNMG120408, 80° Rhombic Negative Turning Insert, RE 0.8mm (0.03"), Carbide (CVD) for rough turning of P Materials in general (medium Interrupted) conditions
6,50 CA$
9,28 CA$
The price is calculated on 31.08.2025
Price incl. VAT, delivery to your address
190 pcs.
Calgary (2360 Portland Str SE)
Main settings
| Turning Load | Rough |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HR6 |
| ANSI code | CNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | CNMG 120408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
P25 (P15-P35) Recommended for steel, cast steel, and ferritic/martensitic stainless steel, from finishing to roughing. This grade is suitable for both continuous and interrupted turning, making it the first choice for general turning applications.
Chip Breaker: HR6
Alternative chipbreaker for steel rough turning. Features a strong cutting edge and a double rake angle design that effectively reduces cutting force while maintaining good chip breaking at small cutting depths.
| Turning Load | Rough |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HR6 |
| ANSI code | CNMG 432 |
| Workpiece Material | [P] Steel |
| ISO code | CNMG 120408 |
| Corner Radius, inch | 0.03 |
| Corner Radius, mm | 0.8 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
P25 (P15-P35) Recommended for steel, cast steel, and ferritic/martensitic stainless steel, from finishing to roughing. This grade is suitable for both continuous and interrupted turning, making it the first choice for general turning applications.
Chip Breaker: HR6
Alternative chipbreaker for steel rough turning. Features a strong cutting edge and a double rake angle design that effectively reduces cutting force while maintaining good chip breaking at small cutting depths.
Reviews