DNMG433 Carbide (CVD) Negative Turning Insert, for P Materials, HR4, grade EC565H
DNMG150412, 55° Rhombic Negative Turning Insert, RE 1.2mm (0.05"), Carbide (CVD) for medium turning of P Materials in general (medium Interrupted) conditions
DNMG150412, 55° Rhombic Negative Turning Insert, RE 1.2mm (0.05"), Carbide (CVD) for medium turning of P Materials in general (medium Interrupted) conditions
| Turning Load | Medium |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | DNMG 433 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150412 |
| Corner Radius, inch | 0.05 |
| Corner Radius, mm | 1.2 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.
| Turning Load | Medium |
|---|---|
| Cutting Conditions | General-Medium Interrupted |
| Insert Style | D Style - 55° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC565H |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | DNMG 433 |
| Workpiece Material | [P] Steel |
| ISO code | DNMG 150412 |
| Corner Radius, inch | 0.05 |
| Corner Radius, mm | 1.2 |
| Brand | EASYCUT |
| Total discount | 30% |
| Item type | Carbide Inserts |
Grade: EC565H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.