CNMG433 Carbide (CVD) Negative Turning Insert, for P Materials, HR4, grade EC461H
CNMG120412, 80° Rhombic Negative Turning Insert, RE 1.2mm (0.05"), Carbide (CVD) for medium turning of P Materials in bad (heavy Interrupted) conditions
CNMG120412, 80° Rhombic Negative Turning Insert, RE 1.2mm (0.05"), Carbide (CVD) for medium turning of P Materials in bad (heavy Interrupted) conditions
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | Bad-Heavy Interrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC461H |
| Corner Radius, inch | 0.05 |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | CNMG 433 |
| ISO code | CNMG 120412 |
| Corner Radius, mm | 1.2 |
| Brand | EASYCUT |
| Item type | Carbide Inserts |
Grade: EC461H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.
| Turning Load | Medium |
|---|---|
| Workpiece Material | [P] Steel |
| Cutting Conditions | Bad-Heavy Interrupted |
| Insert Style | C Style - 80° Rhombic |
| Insert Material | Carbide (CVD) |
| Grade | EC461H |
| Corner Radius, inch | 0.05 |
| Side Clearance | Negative |
| Chip Breaker | HR4 |
| ANSI code | CNMG 433 |
| ISO code | CNMG 120412 |
| Corner Radius, mm | 1.2 |
| Brand | EASYCUT |
| Item type | Carbide Inserts |
Grade: EC461H
Chip Breaker: HR4
First choice for steel medium turning. Offers excellent chip control at low feed rates and shallow cutting depths while reducing crater wear. The geometry design ensures effective chip breaking at high feed rates and cutting depths. Features a double rake angle design for a sharp cutting edge and reduced cutting force.