Universal metalworking ester oil-based fluid EASYCUT VEG001, IBC tote (270 GAL / 1022 L)
Water-miscible ester oil-based concentrate of lubricating and cooling fluid. VEG001-5 allows for high performance machining of various aluminum alloys (incl. 2024, 6061, 6082, 7075, and others), as well as alloyed and unalloyed steels, cast iron, titanium, copper, and its alloys
Water-miscible ester oil-based concentrate of lubricating and cooling fluid. VEG001-5 allows for high performance machining of various aluminum alloys (incl. 2024, 6061, 6082, 7075, and others), as well as alloyed and unalloyed steels, cast iron, titanium, copper, and its alloys
| Main purpose | Aluminum priority, Sustainability, High Performance |
|---|---|
| Workpiece Material | P – Steel, N – Non-Ferrous, M – Stainless Steel, H – Hardened Materials, K – Cast Iron, S – High-Temp Alloys |
| High preassure applications, >40 bar | YES |
| Mineral oil content, %** | Does not contain |
| Refractometer factor | 1.3 |
| Size | 19l / 5gal |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
Refractometer factor: 1.3
The refractometer factor or Brix factor for CNC fluid concentrate is a multiplier used to convert the refractometer readings (Brix scale) into the actual concentration of the emulsion (concentrate + water).
| Main purpose | Aluminum priority, Sustainability, High Performance |
|---|---|
| Workpiece Material | P – Steel, N – Non-Ferrous, M – Stainless Steel, H – Hardened Materials, K – Cast Iron, S – High-Temp Alloys |
| High preassure applications, >40 bar | YES |
| Mineral oil content, %** | Does not contain |
| Refractometer factor | 1.3 |
| Size | 19l / 5gal |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
Refractometer factor: 1.3
The refractometer factor or Brix factor for CNC fluid concentrate is a multiplier used to convert the refractometer readings (Brix scale) into the actual concentration of the emulsion (concentrate + water).
Short Description
Water-miscible ester oil-based concentrate of lubricating and cooling fluid. VEG001 allows for high performance machining of various aluminum alloys (incl. 2024, 6061, 6082, 7075, and others), as well as alloyed and unalloyed steels, cast iron, titanium, copper, and its alloys.
Composition Features
- Does not contain boric acid
- Does not contain formaldehyde
- Does not contain mineral oil
- Contains amines
- Base - ester oil
Product Properties / Advantages
- Stable mixing of the emulsion with water hardness from 5° to 40° dH; During operation (accumulation of salts), an increase in water hardness up to 60°dH is allowed
- High corrosion protection characteristics
- Low foaming when using water of recommended hardness
- Good washability (clean equipment)
- High performance machining of hard materials
- Good compatibility with aluminum
- High surface quality and low tool wear due to well-balanced additives
- Truly eco-friendly (renewable raw materials)
Technical Data
- Kinematic viscosity of the concentrate at 20°C, mm2/s – 177
- ≈Mineral oil content, % - 0%
- pH of fresh 5% emulsion: 9,3
- Corrosion protection DIN 51360/2 - 4% - corrosion degree 0
- Refractometer factor, %/°Brix - 1.3
Recommendations / Features
- To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device
- For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
- The recommended concentration depends on the cutting operations and the material being processed. Turning and milling operations: light to medium duty machining from 5% | heavy duty machining from 8%
- The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.3
- EASYCUT VEG001 coolant can be used for processing of ANY aluminum and copper alloys. However, the tendency of such alloys to form spots (darkening) should be checked in advance
Shelf life / Storage conditions
- Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.
Comments
- Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
- All information on safe and proper handling can be found on the MSDS
DESIGNED IN GERMANY