Metalworking fully synthetic coolant for steel and cast iron EASYCUT SYN311, IBC tote (270 GAL / 1022 L)
Water-miscible fully synthetic concentrate of lubricating and cooling fluid. SYN311 is designed for grinding cast iron and steels. It can also be used for light-duty and medium cutting operations in lathes and milling machines.
Water-miscible fully synthetic concentrate of lubricating and cooling fluid. SYN311 is designed for grinding cast iron and steels. It can also be used for light-duty and medium cutting operations in lathes and milling machines.
| Size | 208l / 55gal |
|---|---|
| Workpiece Material | P – Steel, K – Cast Iron |
| High preassure applications, >40 bar | LIMITED |
| Mineral oil content, %** | Does not contain |
| Refractometer factor, %/°Brix** | 1.7 |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
| Size | 208l / 55gal |
|---|---|
| Workpiece Material | P – Steel, K – Cast Iron |
| High preassure applications, >40 bar | LIMITED |
| Mineral oil content, %** | Does not contain |
| Refractometer factor, %/°Brix** | 1.7 |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
SYN311 DATA SHEET | SYN311 MATERIAL SAFETY DATA SHEET
Short Description
Water-miscible fully synthetic concentrate of lubricating and cooling fluid. SYN311 is designed for grinding cast iron and steels. It can also be used for light-duty and medium cutting operations in lathes and milling machines.
Composition Features
- Does not contain formaldehyde
- Does not contain mineral oil
- Contains amines
- Contains boric acid
- Base - water
Product Properties / Advantages
- Stable mixing of the emulsion with water hardness from 5° to 30° dH; During operation (accumulation of salts), an increase in water hardness up to 60°dH is allowed
- High corrosion protection characteristics
- Low foaming when using water of recommended hardness
- Good washability (clean equipment)
Technical Data
- Kinematic viscosity of the concentrate at 20°C, mm 2 /s — 30
- ≈Mineral oil content, % — 0
- pH of fresh 5% emulsion: — 9.2
- Corrosion protection DIN 51360/2 - 5% — corrosion degree 0
- Refractometer factor, %/°Brix — 1.7
Recommendations / Features
- To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device, for example CS-30
- For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
- The recommended concentration depends on the cutting operations and the material being processed. Grinding: 4-6% | Turning and milling operations: 7-10% (steel, cast iron)
- The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.7
Shelf life / Storage conditions
- Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.
Comments
- Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product.
- All information on safe and proper handling can be found on the MSDS
DESIGNED IN GERMANY