3 December 2024 07:12 Email: info@abamet.ru Phone: (825) 454 66 97
Discount 2%
Archive
Metalworking fully synthetic coolant for steel and cast iron EASYCUT SYN311, IBC tote (270 GAL / 1022 L)
Metalworking fully synthetic coolant for steel and cast iron EASYCUT SYN311, IBC tote (270 GAL / 1022 L)

Metalworking fully synthetic coolant for steel and cast iron EASYCUT SYN311, IBC tote (270 GAL / 1022 L)

SYN311-270 EASYCUT - Part # SYN311-270
Archive

Water-miscible fully synthetic concentrate of lubricating and cooling fluid. SYN311 is designed for grinding cast iron and steels. It can also be used for light-duty and medium cutting operations in lathes and milling machines.

19l / 5gal
208l / 55gal
1022l / 270gal
Workpiece Material P – Steel, K – Cast Iron
High preassure applications, >40 bar LIMITED
Mineral oil content, %** Does not contain
Refractometer factor, %/°Brix** 1.7
Size 19l / 5gal
Brand EASYCUT
Item type Fluids for metalworking
Technical Description

SYN311 DATA SHEET | SYN311 MATERIAL SAFETY DATA SHEET

Short Description

Water-miscible fully synthetic concentrate of lubricating and cooling fluid. SYN311 is designed for grinding cast iron and steels. It can also be used for light-duty and medium cutting operations in lathes and milling machines.

Composition Features

  • Does not contain formaldehyde
  • Does not contain mineral oil
  • Contains amines
  • Contains boric acid
  • Base - water

Product Properties / Advantages

  • Stable mixing of the emulsion with water hardness from 5° to 30° dH; During operation (accumulation of salts), an increase in water hardness up to 60°dH is allowed
  • High corrosion protection characteristics
  • Low foaming when using water of recommended hardness
  • Good washability (clean equipment)

Technical Data

  • Kinematic viscosity of the concentrate at 20°C, mm 2 /s — 30
  • ≈Mineral oil content, % — 0
  • pH of fresh 5% emulsion: — 9.2
  • Corrosion protection DIN 51360/2 - 5% — corrosion degree 0
  • Refractometer factor, %/°Brix — 1.7

Recommendations / Features

  • To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device, for example CS-30
  • For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
  • The recommended concentration depends on the cutting operations and the material being processed. Grinding: 4-6% | Turning and milling operations: 7-10% (steel, cast iron)
  • The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.7

Shelf life / Storage conditions

  • Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

  • Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product.
  • All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY

Reviews