3 December 2024 09:12 Email: info@abamet.ru Phone: (825) 454 66 97
Discount 2%
Made to order
Metalworking ester oil-based fluid for forming operations EASYCUT FORM121, pail (5 GAL / 19 L)
Metalworking ester oil-based fluid for forming operations EASYCUT FORM121, pail (5 GAL / 19 L)

Metalworking ester oil-based fluid for forming operations EASYCUT FORM121, pail (5 GAL / 19 L)

FORM121-5 EASYCUT - Part # FORM121-5
Made to order
19l / 5gal
208l / 55gal
1022l / 270gal
389,78 CA$
397,73 CA$
The price is calculated on 03.12.2024
Main purpose Forming and stamping
Workpiece Material P – Steel
High preassure applications, >40 bar NO
Mineral oil content, %** Does not contain
Refractometer factor, %/°Brix** 1.3
Size 208l / 55gal
Brand EASYCUT
Item type Fluids for metalworking
Technical Description

Short Description

Water-miscible ester oil-based concentrate of lubricating and cooling fluid. FORM121 allows for high performance forming operations, incl.  stamping and drawing of alloy as well as plain carbon steel.

Composition Features

  • Does not contain boric acid
  • Does not contain formaldehyde
  • Does not contain mineral oil
  • Contains amines
  • Base - ester oil

Product Properties / Advantages

  • Good cooling and detergency properties
  • High surface finish and low tool wear due to a balanced combination of active ingredients

Technical Data

  • Kinematic viscosity of the concentrate at 20°C, mm2/s – 116
  • ≈Mineral oil content, % - 0%
  • pH of fresh 5% emulsion: - 8.2
  • Corrosion protection DIN 51360/2 - 9% - corrosion degree 0
  • Refractometer factor, %/°Brix - 1.3

Recommendations / Features

  • To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device
  • For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
  • The recommended concentration for forming operations: from 8%
  • The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.3

Shelf life / Storage conditions

  • Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

  • Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
  • All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY

Reviews
Documents (PDF)
PDF
FORM121 Safety Data Sheet English
PDF
FORM121 Product Information Data Sheet