.svg)
Dielectric fluid for die-sinker EDM machines EASYCUT EDM601, pail (5 GAL / 19 L)
The universal dielectric fluid (oil) EDM601 is intended for electroerosive processing on die-sinking machines, as well as on wire-cutting machines using oil technology. It is suitable for roughing, semi-finishing, and finishing electroerosion machining of steels, hard alloys, and non-ferrous materials. Mixing is possible without consequences with some other dielectrics incl. Blaser SOREPI LM and Blasospark GT250.
The universal dielectric fluid (oil) EDM601 is intended for electroerosive processing on die-sinking machines, as well as on wire-cutting machines using oil technology. It is suitable for roughing, semi-finishing, and finishing electroerosion machining of steels, hard alloys, and non-ferrous materials. Mixing is possible without consequences with some other dielectrics incl. Blaser SOREPI LM and Blasospark GT250.
| Size | 1022l / 270gal |
|---|---|
| Workpiece Material | P – Steel, N – Non-Ferrous, M – Stainless Steel, H – Hardened Materials, K – Cast Iron, S – High-Temp Alloys |
| Mineral oil content, %** | Does not contain |
| Flash point COC [°C] | 102 |
| Copper corrosion (3 h / 100 °C) | 1a (slight tarnish) |
| Kin. Viscosity at 40 °C [mm²/s] | 2.3 |
| Odor | Very low |
| Appearance | Colourless, clear |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
| Size | 1022l / 270gal |
|---|---|
| Workpiece Material | P – Steel, N – Non-Ferrous, M – Stainless Steel, H – Hardened Materials, K – Cast Iron, S – High-Temp Alloys |
| Mineral oil content, %** | Does not contain |
| Flash point COC [°C] | 102 |
| Copper corrosion (3 h / 100 °C) | 1a (slight tarnish) |
| Kin. Viscosity at 40 °C [mm²/s] | 2.3 |
| Odor | Very low |
| Appearance | Colourless, clear |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |