Multipurpose Cutting Oil EASYCUT NMO121 - ISO 12, 5 GAL pail

Short Description

Mineral oil-based low viscosity multipurpose neat metalworking oil NMO121 is used undiluted for low to medium duty general machining incl. GD (gun drilling) of alloy steel, plain carbon steel, cast iron, aluminum and yellow metals.

Composition Features

• Does not contain chlorine

Product Properties / Advantages

• High surface finish and low tool wear due to optimally balanced EP additives
• Excellent stability against ageing and oxidation
• Low drag out

Technical Data

• Appearance: Brown, Clear
• Density at 15 °C [kg/m3]: 851
• Kinematic viscosity at 40 °C [mm2/s]: 12
• Flash point [°C]: >160
• Corrosion of copper (3 hours / 100 °C): ​​1a (slight tarnish)​

Recommendations / Features

• Mixing with other mineral-based neat cutting oils of similar viscosity is generally feasible without adverse effects. However, EASYCUT representatives do not assume responsibility for any potential incompatibility with products from other manufacturers. To ensure compatibility, it is recommended to perform a preliminary test by mixing a small quantity of the two oils in a transparent container. If no phase separation is observed after 24 hours, the products can be safely mixed in a machine.