Metalworking polymer based coolant for steel and cast iron EASYCUT POLY601, drum (55 GAL / 208 L)
Water-miscible polymer based concentrate of lubricating and cooling fluid. POLY601 is designed for high performance machining including ultrasonic operations of alloyed and non-alloyed steels, cast iron, titanium and non metall materials.
Water-miscible polymer based concentrate of lubricating and cooling fluid. POLY601 is designed for high performance machining including ultrasonic operations of alloyed and non-alloyed steels, cast iron, titanium and non metall materials.
| Workpiece Material | P – Steel, M – Stainless Steel, H – Hardened Materials, S – High-Temp Alloys |
|---|---|
| High preassure applications, >40 bar | YES |
| Mineral oil content, %** | Does not contain |
| Refractometer factor, %/°Brix** | 1.4 |
| Size | 19l / 5gal |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
| Workpiece Material | P – Steel, M – Stainless Steel, H – Hardened Materials, S – High-Temp Alloys |
|---|---|
| High preassure applications, >40 bar | YES |
| Mineral oil content, %** | Does not contain |
| Refractometer factor, %/°Brix** | 1.4 |
| Size | 19l / 5gal |
| Brand | EASYCUT |
| Item type | Fluids for metalworking |
POLY601 DATA SHEET | POLY601 MATERIAL SAFETY DATA SHEET
Short Description
Water-miscible polymer based concentrate of lubricating and cooling fluid. POLY601 is designed for high performance machining including ultrasonic operations of alloyed and non-alloyed steels, cast iron, titanium and non metall materials.
Composition Features
- Does not contain boric acid
- Does not contain formaldehyde
- Does not contain mineral oil
- Contains amines
- Base – polymer (glycol)
Product Properties / Advantages
- Stable mixing of the emulsion with water hardness from 0° to 20° dH. During operation (accumulation of salts), an increase in water hardness up to 40°dH is allowed
- High corrosion protection characteristics
- Low foaming when using water of recommended hardness
- Good washability (clean equipment)
- High performance machining of hard materials
- Very good air release property
- High surface quality and low tool wear due to well-balanced additives
Technical Data
- Kinematic viscosity of the concentrate at 20°C, mm 2 /s – 70
- ≈Mineral oil content, % – 0
- pH of fresh 5% emulsion: 9,5
- Сorrosion protection DIN 51360/2 – 4% – corrosion degree 0
- Refractometer factor, %/°Brix – 1.4
Recommendations / Features
- To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device, for example CS-30
- For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
- The recommended concentration depends on the cutting operations and the material being processed. Turning and milling operations: light to medium duty machining from 6% | heavy duty machining from 8%
- The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.4
Shelf life / Storage conditions
- Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.
Comments
- Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
- All information on safe and proper handling can be found on the MSDS
DESIGNED IN GERMANY