Metalworking ester oil-based fluid for forming operations EASYCUT FORM121, pail (5 GAL / 19 L)

Short Description

Water-miscible ester oil-based concentrate of lubricating and cooling fluid. FORM121 allows for high performance forming operations, incl.  stamping and drawing of alloy as well as plain carbon steel.

Composition Features

• Does not contain boric acid
• Does not contain formaldehyde
• Does not contain mineral oil
• Contains amines
• Base - ester oil

Product Properties / Advantages

• Good cooling and detergency properties
• High surface finish and low tool wear due to a balanced combination of active ingredients

Technical Data

• Kinematic viscosity of the concentrate at 20°C, mm2/s – 116
• ≈Mineral oil content, % - 0%
• pH of fresh 5% emulsion: - 8.2
• Corrosion protection DIN 51360/2 - 9% - corrosion degree 0
• Refractometer factor, %/°Brix - 1.3

Recommendations / Features

• To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device
• For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
• The recommended concentration for forming operations: from 8%
• The concentration of the working emulsion is measured by a manual ( LQ20T ) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.3

Shelf life / Storage conditions

• Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

• Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
• All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY