3 December 2024 09:12 Email: info@abamet.ru Phone: (825) 454 66 97
Discount 2%
Running out of stock
Salt-free neutral cleaner for CNC equipment and parts EASYCUT ETAS0700, pail (5 GAL / 19 L)
Salt-free neutral cleaner for CNC equipment and parts EASYCUT ETAS0700, pail (5 GAL / 19 L)

Salt-free neutral cleaner for CNC equipment and parts EASYCUT ETAS0700, pail (5 GAL / 19 L)

ETAS0700-5 EASYCUT - Part # ETAS0700-5
Running out of stock
209,94 CA$
214,22 CA$
The price is calculated on 03.12.2024
1 pcs.
Calgary (2360 Portland Str SE)
Main purpose Cleaner
Mineral oil content, %** Neat Oil
Size 19l / 5gal
Brand EASYCUT
Item type Fluids for metalworking
Technical Description

Short Description

ETA S 0700 has excellent demulsification properties and very good corrosion protection. Ideal for cleaning steel and cast iron as well as yellow metals and many aluminum alloys.

Composition Features

  • Does not contain phosphates
  • Does not contain silicates
  • Does not contain boron compounds
  • Does not formaldehyde releasing bactericides

Product Properties / Advantages

  • Optimum demulsibility
  • Excellent corrosion protection based on amines for better protection in the vapor phase
  • Very good foaming behavior over a wide temperature range

Technical Data

  • Appearance of concentrate: yellow, liquid
  • Density at 15 °C [kg/m3]: 1084
  • pH of fresh 1% emulsion: - 9.6
  • Refractometer factor, %/°Brix - 1.7
  • Titration factor [Vol%/ml]: 0.3 (distilled water, 0,1 N HCl, Methyl Orange)
  • Ingredients referred to Detergents Regulation 648/2004/EG: < 0.1 % phosphonates; < 0.1 % nonionic surfactants

Recommendations / Features

  • ETA S 0700 can be used in recommended concentration for spraying, immersion and ultrasound processes as well as in steam jet machines and high-pressure spray washers. Due to the very good pressure stability the product can also be used for high pressure deburring.
  • The recommended operation conditions depend on the contamination of parts to be cleaned: Concentration from 0.5% to 5%; Temperature from 20 °C to 80 °C
  • We highly recommend to use demineralized water to avoid limescale deposits.
  • The concentration of the in-use cleaner is measured by a manual (LQ20T) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.7. The concentration may be also checked by titration.
  • We recommend to check the compatibility of aluminum alloys and yellow metals in advance.

Shelf life / Storage conditions

  • Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

  • Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
  • All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY

Reviews
Documents (PDF)
PDF
ETAS0700 Safety Data Sheet English
PDF
ETAS0700 Product Information Data Sheet
PDF
ETAS0700 Fiche de Données de Sécurité