VMC Sizes Explained: Where Bumblebee DV Machines Sit Against the Haas VF Range
The Haas VF Series is the reference for general-purpose vertical machining centers in North America, and the VF-2 is the model Haas itself calls its most popular. Shop owners often describe machine size in Haas terms, so this guide uses that scale to show where the five Bumblebee DV sizes fall.
Only the work envelope is compared: travels, table size and machine weight. Spindle, control, tool changer and price are left to each machine page.
Up to 34" of X: VF-2 class
| Bumblebee DV7A | Haas VF-2 | Haas VF-2YT | Bumblebee DV9A | |
|---|---|---|---|---|
| X travel, in | 27.6 | 30.0 | 30.0 | 33.9 |
| Y travel, in | 16.5 | 16.0 | 20.0 | 19.7 |
| Z travel, in | 19.7 | 20.0 | 20.0 | 19.7 |
| Table length, in | 31.5 | 36.0 | 36.0 | 43.3 |
| Table width, in | 16.5 | 14.0 | 18.0 | 19.7 |
| Machine weight, lb | 10,582 | 7,800 | 7,800 | 12,566 |
| Machine weight, kg | 4,800 | 3,539 | 3,539 | 5,700 |
The DV7A is a little shorter in X than the VF-2 with a wider table; the DV9A sits between the VF-2 and the VF-3.
40–43" of X: VF-3 class
| Haas VF-3 | Haas VF-3YT | Bumblebee DV11A / DV11D | |
|---|---|---|---|
| X travel, in | 40.0 | 40.0 | 43.3 |
| Y travel, in | 20.0 | 26.0 | 23.6 |
| Z travel, in | 25.0 | 25.0 | 23.6 |
| Table length, in | 48.0 | 54.0 | 50.4 |
| Table width, in | 18.0 | 24.0 | 23.6 |
| Machine weight, lb | 11,720 | 12,560 | 15,873 / 17,196 |
| Machine weight, kg | 5,316 | 5,697 | 7,200 / 7,800 |
The DV11 has slightly more X than either VF-3 and Y between the VF-3 and the VF-3YT; the VF-3 has more Z.
50–55" of X: VF-4 and VF-5 class
| Haas VF-4 | Haas VF-5/40 | Bumblebee DV14A | |
|---|---|---|---|
| X travel, in | 50.0 | 50.0 | 55.1 |
| Y travel, in | 20.0 | 26.0 | 31.5 |
| Z travel, in | 25.0 | 25.0 | 27.6 |
| Table length, in | 52.0 | 54.0 | 63.0 |
| Table width, in | 19.5 | 24.0 | 29.9 |
| Machine weight, lb | 11,720 | 12,700 | 23,810 |
| Machine weight, kg | 5,316 | 5,761 | 10,800 |
The DV14A is longer and wider than both Haas machines and has more Z.
63–64" of X: VF-6 class
| Bumblebee DV16A / DV16D | Haas VF-6/40 | |
|---|---|---|
| X travel, in | 63.0 | 64.0 |
| Y travel, in | 31.5 | 32.0 |
| Z travel, in | 27.6 | 30.0 |
| Table length, in | 70.9 | 64.0 |
| Table width, in | 29.9 | 28.0 |
| Machine weight, lb | 26,015 / 26,676 | 22,300 |
| Machine weight, kg | 11,800 / 12,100 | 10,116 |
The closest pair: almost the same X and Y. The VF-6/40 has more Z, the DV16 a longer and wider table.
In short
- From 40" of X up, Bumblebee tables are wider than the standard Haas model of similar length.
- Bumblebee machines are heavier at every size.
Haas figures are as published by Haas; Bumblebee figures are converted from millimetres. Haas weight is the shipping weight without chip conveyor, Bumblebee weight is the machine weight. Where a Bumblebee column shows two weights, the second is the 50-taper version (DV11D, DV16D); travels and table are the same.
Sources
Haas data taken from the official Haas Automation website on November 16, 2026, Specs section of each model page: VF-2, VF-2YT, VF-3, VF-3YT, VF-4, VF-5/40, VF-6/40. Haas may change specifications at any time. Bumblebee data: Bumblebee DV catalog 2026 and technical information.
Haas and VF are trademarks of Haas Automation, Inc. CNCvalue.ca is not affiliated with or endorsed by Haas Automation.
Not sure which size fits your parts?
Send us a drawing or the size and weight of your largest part, and we will tell you which machine fits.
Bumblebee vertical machining centersAll vertical machining centers