Honing Oil EASYCUT NHO051 - 270 Gallon

NHO051-270Made to order

CA$6,306.08

Std. delivery incl. Crossed-out price = offline retail

Product Attributes

Documents (PDF)

Technical Description

Reviews

Density at 15 °C [kg/m3]

824

Flash point COC [°C]

134

Copper corrosion (3 h / 100 °C)

1b (slight tarnish)

Kin. Viscosity at 40 °C [mm²/s]

Workpiece Material

P - Steel, H - Hardened Materials, K - Cast Iron

Size

1022l / 270gal

Application

Honing

Mineral oil content, %

Neat Oil

Brand

EASYCUT

Item type

Cutting Oils

Documents (PDF)

PDF

NHO051 Safety Data Sheet EN PDF

NHO051 Product Information Data Sheet

Technical Description

Short Description

Mineral oil-based low viscosity metallworking neat oil NHO051-270 is used undiluted for honing and grinding of cast iron, alloy as well as plain carbon steel and titanium alloys.

Composition Features

Does not contain chlorine

Product Properties / Advantages

Specially developed high performance honing oil
Low aromatic content thanks to carefully chosen solvent refined mineral oil
Excellent stability against ageing and oxidation
Good cooling and detergency properties

Technical Data

Appearance: Yellow to brown, clear
Density at 15 °C [kg/m3]: 824
Kinematic viscosity at 40 °C [mm2/s]: 5
Flash point [°C]: >134
Corrosion of copper (3 hours / 100 °C): 1b (slight tarnish)

Recommendations / Features

Mixing with other mineral-based neat honing/grinding/cutting oils of similar viscosity is generally feasible without adverse effects. However, EASYCUT representatives do not assume responsibility for any potential incompatibility with products from other manufacturers. To ensure compatibility, it is recommended to perform a preliminary test by mixing a small quantity of the two oils in a transparent container. If no phase separation is observed after 24 hours, the products can be safely mixed in a machine.

Reviews

You must be logged in to leave a review.