Oct 24, 2026, 6:08 PM

Email: info@CNCmarket.ca

Phone: (825) 454 66 97

BVR301

EASYCUT BVR301 Metalworking Coolant for Heavy Machining, 5 Gallon Pail

Name: BVR301-5 High Performance Fluid
Brand: EASYCUT
SKU: BVR301-5
Price: 223.17 CAD
Availability: InStock

BVR301-5Archive

Product Attributes

Documents (PDF)

Technical Description

Reviews

Refractometer factor

1.2

Workpiece Material

S - High-Temp Alloys, N - Non-Ferrous, M - Stainless Steel, P - Steel, H - Hardened Materials, K - Cast Iron

Size

19l / 5gal

Application

Universality (general machining), High Performance, Aluminum priority

Mineral oil content, %

High preassure applications, >40 bar

YES

Brand

EASYCUT

Item type

Fluids

Refractometer factor:1.2

$Refraction 1-2$

Documents (PDF)

PDF

BVR301 Product Information Data Sheet

Technical Description

Short Description

Water-miscible semi-synthetic concentrate of lubricating and cooling fluid. BVR301 allows for high performance machining of various aluminum alloys (incl. 2024, 6061, 6082, 7075, and others), as well as alloyed and unalloyed steels, cast iron, titanium, copper, and its alloys. Contains mineral oil.

Composition Features

Does not contain boric acid
Does not contain formaldehyde
Contains secondary amines (DCHA)
Contains bactericides
Polar lubricity improvers for better aluminium performance

Product Properties / Advantages

Stable mixing of the emulsion with water hardness from 10° to 30° dH; During operation (accumulation of salts), an increase in water hardness up to 150°dH is allowed
High corrosion protection characteristics
Low foaming when using water of recommended hardness
Good washability (clean equipment)
Polar lubricity improvers and tight control of the in-use pH achieve optimum results when machining aluminum

Technical Data

Kinematic viscosity of the concentrate at 20°C, mm2/s – 150
≈Mineral oil content, % - 30%
pH of fresh 5% emulsion: 9,5
Corrosion protection DIN 51360/2 - 5% - corrosion degree 0
Refractometer factor, %/°Brix - 1.2

Recommendations / Features

To prepare a high-quality finely dispersed emulsion, it is recommended to use the automatic mixer device

For manual preparation, it is recommended to slowly add the concentrate to the water (not water to the concentrate), mixing evenly
The recommended concentration depends on the cutting operations and the material being processed. Turning and milling operations: 6-8% (steel, cast iron) / 7-10% (aluminum)|Grinding: 4-6%
The concentration of the working emulsion is measured by a manual (LQ20T) or electronic refractometer. To do this, the read value is multiplied by the refractometer factor of 1.2
EASYCUT PRO301 coolant can be used for processing of ANY aluminum and copper alloys. However, the tendency of such alloys to form spots (darkening) should be checked in advance

Shelf life / Storage conditions

Stable for 12 months when stored at a temperature of 5 °C to 40 °C in unopened containers.

Comments

Minor variations in color and appearance are possible due to the raw materials chosen. However, these have no influences on the functionality of the product
All information on safe and proper handling can be found on the MSDS

DESIGNED IN GERMANY

Reviews

You must be logged in to leave a review.